Bryant Unlimited

Credit Card Logos

+44 (0)20 8404 4050

'F' Connector Tooling Chart

Stripping dimensions and tooling for Bryant 'F' Connectors

Connector Cable A B C Crimp Tool
FCT 100 CT 100 & RG 6 8 mm 5 mm 7 mm FCT CCT
FCT 101 CT 125 9 mm 4 mm 8 mm FCT CCT
FCT 102 CT 167 & RG 11 5 mm 5 mm 4 mm FCT CCT
FCT 103 RG 59 8 mm 5 mm 7 mm FCT CCT

Instructions for use

Strip and prepare the end of the cable as per the table and diagram above. Bend the screen back over the outer jacket and remove the inner foil (if the cable has one!) completely. Push the connector on so that the inner tube slides between the dielectric and the screen & foil (The dielectric should be flush with the face inside the threaded end). Crimp the outer sleeve with the crimp tool.

'F' Connector Tooling

New Products
Request a Catalogue
I can't find it!

© Copyright 2018 Bryant Unlimited | Site Map | Contact | Privacy | Terms and Conditions

Connect with us Facebook   googleplus   twitter   linked in
      E&OE Powered by Intergage
Powered by Intergage