 This range of termination panels have been introduced to assist in the prewiring of equipment racks. We have chosen the EDAC 516/VARELCO 8016 series of connector as these are very popular in the broadcast industry and the most cost effective. Panels for the whole range of connectors are offered. The panels are manufactured from 2 and 3U aluminium, 3mm 10 SWG extrusion. Panel assemblies are equipped with a cable strain relief bar and two designation strips. A special feature of these panels is the pitch of the connector cut outs. They are on a constant pitch but this is not centralised on the panels, therefore when more than one panel is used they can become handed, which enables the cable access of a connector not to foul on the cover of the connectors mounted in the panel beneath. The panels are offered in two finishes as standard, which are Black anodise and Dawn Mist semi-gloss paint. A full range of blank plates are offered to cover unused apertures, manufactured from 16 SWG steel. |