The DIN 1.0/2.3 connector is a 75 Ohm miniature push pull crimp connector for Belden 1855ENH, Conducfil SD01 series cables and their equivalents, enabling a speedy connection and an extremely high packing density in racks (2-3 times more than conventional BNC's).
The connector is being used increasingly on video routers, such as Miranda Nvision equipment, and very high density video patch panels such as the Switchcraft Micro Self-Normalling 48 way video patchpanel shown in section 1.
HD-SDI is supported up to 3Gbs (1080p).
A crimp tool and die set is also available. (Hex 0.187" or 4.75mm)
Please Note: For people with big fingers, we can make up transition cables from DIN to BNC.
Each box of 100 will be supplied with a DIN ALIGN pin alignement tool. If you buy less than 100, then you will need to order the DIN ALIGN separately.
|
